Decontamination Wash — Sicarz

Cleaner than clean.

Tar spots, iron fallout, bonded grime — a decontamination wash removes what a regular wash can't touch.

Free quote

Get a Deep Wash quote for your car

Share your car model and we'll respond with an honest recommendation — usually within a few working hours.

What is it

About Decontamination Wash

A decontamination wash — also called a detailer wash or deep wash — is the deepest level of cleaning your paint can get without a polishing machine ever touching it.

Over months, paint collects contamination that bonds to the surface: iron particles from brake dust, tar spots from fresh roads, tree sap and industrial fallout. A regular wash slides right over them — you can feel them as roughness when you run your hand across the paint.

The deep wash removes all of it, chemically and with clay treatment, leaving the paint genuinely clean and glass-smooth. It’s also the essential first step before polishing, coating or PPF.

Why your car needs it

The benefits

🧲

Iron Fallout Removal

Brake-dust particles chemically dissolved out of the paint, not sealed in.

🛢

Tar & Sap Removal

Road tar spots and tree sap lifted off safely — no scraping, no marks.

🧼

Clay Bar Treatment

Bonded contamination pulled off the surface panel by panel.

🪞

Glass-Smooth Finish

Run your hand over the paint after — that smoothness is the proof.

Gloss Revival

Clean paint reflects better. The deep wash alone visibly lifts gloss.

🧱

Perfect Prep

The mandatory foundation before any coating, PPF or polishing work.

How we work

The Sicarz process

Defined steps, documented work, quality-checked before handover — every single time.

  1. Foam Pre-Wash

    Thick foam soak lifts loose dirt before anything touches the paint.

  2. Chemical Decontamination

    Iron remover dissolves embedded fallout — you can see it bleed purple.

  3. Tar & Sap Removal

    Solvent treatment melts tar spots and sap off safely.

  4. Clay Treatment

    Clay bar glides panel by panel, pulling off bonded grime.

  5. Seal & Finish

    Paint protected with a sealant layer, dried and inspected.

Why here

Why owners choose Sicarz

🧪

Detailer-Grade Chemicals

Proper iron removers and tar solvents — products made for this job.

👐

Hand-Finished

Clay and inspection done by hand, panel by panel.

🏭

Indoor Bay

Decontaminated paint never sits collecting fresh dust mid-process.

🔍

Honest Assessment

We check your paint first and tell you exactly what it needs.

The work

Deep Wash gallery

From this service, in this studio.

Go further

Enhance your deep wash with add-ons

Twelve ways to level up any service — build your package with the interactive selector.

Explore Add-ons

Questions

Deep Wash — asked every week

A car wash removes dirt sitting on the paint. A decontamination wash removes what's bonded into it — iron fallout, tar, sap and embedded grime that regular washing can't shift.

The touch test: after a normal wash, run your fingers across the bonnet. If it feels gritty or rough instead of glass-smooth, the paint is contaminated.

It depends on where the car lives and drives. Cars parked outdoors or driven daily typically need it a few times a year — we'll advise after seeing your paint.

Yes, done properly with lubrication and clean clay it's completely paint-safe — that's exactly why it's done by trained hands, not rushed.

@sicarz_india on Instagram

Watch the studio in action

All our latest reels, straight from the feed.

Ready when
you are.

💬 📞